New

wAP 60Gx3 AP

60 GHz Base Station with Phase array 180° beamforming Integrated antenna, specially designed for Multipoint connections

Shipping cost (United States)

2nd Day Air: $0.00

2nd Day Air

Next Day Air: $0.00

Next Day Air

Next Day Air Saver: $0.00

Next Day Air Saver

Next Day Air Early AM: $0.00

Next Day Air Early AM

UPS Standard: $0.00

UPS Standard

The wAP 60Gx3 AP is a new access point model for the 60 GHz spectrum. Compared with the regular wAP 60G AP, this new model has an entirely new antenna array, with support for a much wider angle of coverage and is optimized specifically for the multipoint operation.

The 96 antenna elements work with beamforming technology to provide connectivity for up to eight 60 GHz client devices at the same time, in a 180-degree field of view. Build a cost-effective point to multipoint setup in the clean 60 GHz wireless spectrum, at a fraction of the cost.

Two wAP 60Gx3 AP units can be used in point-to-point configurations as well.

Ethernet test results

RBwAPG-60ad-SAr2 IPQ-4019 1G one port test
Mode Configuration 1518 byte 512 byte 64 byte
kbps Mbps kbps Mbps kbps Mbps
Bridging none (fast path) 81,2 986.1 234,9 962.2 1482,6 759.1
Bridging 25 bridge filter rules 81,2 986.1 227,7 932.7 231,9 118.7
Routing none (fast path) 81,2 986.1 235,1 963.0 1421,8 728.0
Routing 25 simple queues 81,2 986.1 235,1 963.0 458,3 234.6
Routing 25 ip filter rules 81,2 986.1 234,9 962.2 236,8 121.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay) and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration; different configurations most likely will result in lower results

IPsec test results

RBwAPG-60ad-SAr2 IPQ-4018 IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kbps Mbps kbps Mbps kbps Mbps
Single tunnel AES-128-CBC + SHA1 37.9 424.5 59 241.7 61.6 31.5
256 tunnels AES-128-CBC + SHA1 36 403.2 38.5 157.7 39.8 20.4
256 tunnels AES-128-CBC + SHA256 36 403.2 38.5 157.7 39.8 20.4
256 tunnels AES-256-CBC + SHA1 34.4 385.3 37.9 155.2 39.8 20.4
256 tunnels AES-256-CBC + SHA256 34.4 385.3 37.9 155.2 39.8 20.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay) and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance and are reached using mentioned hardware and software configuration, and different configurations most likely will result in lower results
MikroTik
RBwAPG-60ad-SA
28 cm
12 cm
9 cm
1 kg
7540000002503
Data sheet
10/100/1000 Ethernet ports
1
CPU
IPQ-4019
Product code
RBwAPG-60ad-SA
Architecture
ARM 32bit
CPU core count
4
CPU nominal frequency
716 MHz
Dimensions
185 x 85 x 30 mm
License level
4
Operating System
RouterOS
Size of RAM
256MB
Storage size
16MB
Storage type
FLASH
Tested ambient temperature
-40°C to 70°C
Max Power consumption
11W
PoE in
802.3af/at
PoE in input Voltage
20-57 V
Number of DC inputs
2 (DC jack, PoE-IN)
DC jack input Voltage
12-57 V