SXTsq Lite60

SXTsq Lite60

For use as 60GHz CPE in Point-to-Multipoint setups for connections up to 200m with wAP 60G AP, low-cost version

$69.00
Back-Order, Contact us for the ETA
 Product available for back-orders

Description

The SXTsq Lite60 is a new model in our 60 GHz lineup. This is a low cost CPE unit for connecting to a 60 GHz AP, enabling you to build a cost effective point to multipoint setup in the clean 60 GHz wireless spectrum. Connect up to eight of these CPE units to a 60 GHz access point, such as our wAP60G AP.

For links up to 200 meters, this is the best alternative for wireless connections where 2 and 5 GHz wireless space is crowded and unreliable, at a fraction of the cost. Also, it's possible to make point-to-point link with two SXTsq Lite60.

Ethernet test results

RB SXTsq-60ad QCA9531 100M one port test
Mode Configuration 1518 byte 512 byte 64 byte
kbps Mbps kbps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 173.6 88.9
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 70.9 36.3
Routing none (fast path) 8.1 98.4 23.5 96.3 160.8 82.3
Routing 25 simple queues 8.1 98.4 23.5 96.3 90.8 46.5
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Data sheet

MikroTik
RB SXTsq-60ad
12.90 cm
12.90 cm
3.40 cm
7540000001124
Data sheet
10/100 Ethernet ports
1
Product code
RBSXTsq-60ad
Architecture
MIPSBE
CPU
QCA9531
CPU core count
1
Dimensions
129 x 129 x 34 mm
License level
3
Operating System
RouterOS
Size of RAM
64 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-40°C .. +50°C
PoE in
Passive PoE
PoE in input Voltage
12-30 V
Number of DC inputs
1 (PoE-IN)