wsAP ac lite

wsAP ac lite

In-wall Dual Concurrent 2.4GHz / 5GHz wireless access point with three Ethernet ports and telephone jack pass through for hospitality networks

$49.00
Back-Order, Contact us for the ETA
 Product available for orders

Shipping cost (United States)

2nd Day Air: $0.00

2nd Day Air

Next Day Air: $0.00

Next Day Air

Next Day Air Saver: $0.00

Next Day Air Saver

Next Day Air Early AM: $0.00

Next Day Air Early AM

UPS Standard: $0.00

UPS Standard

The wsAP ac lite is a perfect access point (AP) for hospitality networks (hotels, shopping malls, hospitals, airports etc.). It has an unobtrusive case that fits in standard wall power sockets. This way, the unit doesn’t attract attention and blends into any environment.

The wsAP has three Ethernet ports: one on the back side for easy PoE-in, and two LAN ports behind the front door. The device provides Dual concurrent 2.4 GHz and 5 GHz WiFi coverage, it supports 802.11ac, as well as legacy standards. A USB 2.0 port is provided, to charge mobile devices or for storage.

The device also has a pass through telephone jack (RJ11) to connect a desktop phone in a hotel room, for easier cable management. As a separate accessory you can order a special screw set (product code K50), that ensures the bottom door can only be opened by the owner. Mounting bracket fits US and EU most popular telecomunication sockets.

We have two versions available.

- wsAP ac lite-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- wsAP ac lite (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

Wireless specifications

2.4 GHzTransmit (dBm)Receive Sensitivity
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71
5 GHzTransmit (dBm)Receive Sensitivity
6MBit/s 23 -93
54MBit/s 20 -75
MCS0 23 -93
MCS7 19 -71
MCS9 16 -63

Ethernet test results

RBwsAP-5Hac2nD QCA9531 100M three port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 24.4 296.3 70.5 288.8 387.8 198.6
Bridging 25 bridge filter rules 24.4 296.3 70.5 288.8 86.5 44.3
Routing none (fast path) 24.4 296.3 70.5 288.8 220.4 112.8
Routing 25 simple queues 24.4 296.3 70.5 288.8 130.7 66.9
Routing 25 ip filter rules 24.4 296.3 57.7 236.3 58.8 30.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

MikroTik
RBwsAP-5Hac2nD
11.20 cm
12.60 cm
3 cm
7540000000790
Data sheet
10/100 Ethernet ports
3
CPU
QCA9531
Product code
RBwsAP-5Hac2nD
Architecture
MIPSBE
CPU core count
1
CPU nominal frequency
650 MHz
Dimensions
112 x 126 x 30 mm
License level
4
Operating System
RouterOS
Size of RAM
64 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-40°C .. +60°C
Max Power consumption
10
PoE in
802.3af/at
PoE out
Passive PoE
PoE in input Voltage
18-57 V
Number of DC inputs
1 (PoE-IN)
Number of USB ports
1
USB Power Reset
Yes
USB slot type
USB type A
Max USB current (A)
0.5
Wireless 2.4 GHz number of chains
2
Wireless 2.4 GHz standards
802.11b/g/n
Antenna gain dBi for 2.4 GHz
1.5
Wireless 2.4 GHz chip model
QCA9531
Max out per port output - input (less than 30 V)
420 mA
Max total out (A)
420 mA
Max power consumption without attachments
10W
Max out per port output (input more than 30 V)
420 mA
Wireless 5 GHz number of chains
1
Wireless 5 GHz standards
802.11a/n/ac
Antenna gain dBi for 5 GHz
3
Wireless 5 GHz chip model
QCA-9887