hAP

hAP

2.4GHz AP, Five Ethernet ports, PoE-out on port 5, USB for 3G/4G support

$45.00
Back-Order, Contact us for the ETA
 Product available for orders

This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas.

The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included.

hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.

 

Wireless specifications

2.4 GHzTransmit (dBm)Receive Sensitivity
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71

Ethernet test results

RB951Ui-2nD QCA9531 (650Mhz) 100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 40.6 493.0 117.4 480.9 217.0 111.1
Bridging 25 bridge filter rules 40.6 493.0 70.1 287.1 70.9 36.3
Routing none (fast path) 40.6 493.0 117.4 480.9 200.8 102.8
Routing 25 simple queues 40.6 493.0 79.6 326.0 90.8 46.5
Routing 25 ip filter rules 40.6 493.0 42.2 172.8 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

RB951Ui-2nD
11.30 cm
8.90 cm
2.80 cm
Data sheet
CPU
QCA9531
Product code
RB951Ui-2nD
Architecture
MIPSBE
CPU core count
1
CPU nominal frequency
650 MHz
Dimensions
113 x 89 x 28mm
License level
4
Operating System
RouterOS
Size of RAM
64 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-30 + 70 C
Max Power consumption
5
PoE in
Passive PoE
PoE out
Passive PoE
PoE in input Voltage
10-28 V
Number of DC inputs
2 (PoE-IN, DC jack)
DC jack input Voltage
10-28 V
10/100 Ethernet ports
5
Number of USB ports
1
USB Power Reset
Yes
USB slot type
USB type A
Max USB current (A)
1
Wireless 2.4 GHz number of chains
2
Wireless 2.4 GHz standards
802.11b/g/n
Antenna gain dBi for 2.4 GHz
1.5
Wireless 2.4 GHz chip model
QCA9531
Max out per port output - input (less than 30 V)
500 mA
Max total out (A)
500 mA
Max power consumption without attachments
5W
Max out per port output (input more than 30 V)
0 mA