cAP lite

cAP lite

Low-cost dual-chain 2.4GHz AP with wall and ceiling enclosure

$29.00
Back-Order, Contact us for the ETA
 Product available for orders

Shipping cost (United States)

2nd Day Air: $0.00

2nd Day Air

Next Day Air: $0.00

Next Day Air

Next Day Air Saver: $0.00

Next Day Air Saver

Next Day Air Early AM: $0.00

Next Day Air Early AM

UPS Standard: $0.00

UPS Standard

The cAP lite is a tiny access point device, perfect for public locations and hospitality businesses like hotels, airports, shopping malls etc. Included with the product are two different casings, which can easily be swapped out, or, if you really like to fit the design with the environment, we are providing 3D printer friendly design files.

The cAP lite supports 802.11b/g/n and can be powered by power over ethernet. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. The cAP lite can also be used as a stand alone access point with the full potential of RouterOS.

Wireless specifications

2.4 GHzTransmit (dBm)Receive Sensitivity
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71

Ethernet test results

RBcAPL-2nD QCA9533 100M one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 173.6 88.9
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 70.9 36.3
Routing none (fast path) 8.1 98.4 23.5 96.3 160.8 82.3
Routing 25 simple queues 8.1 98.4 23.5 96.3 90.8 46.5
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

MikroTik
RBcAPL-2nD
8.80 cm
5.20 cm
2 cm
7540000000745
Data sheet
10/100 Ethernet ports
1
CPU
QCA9533
Product code
RBcAPL-2nD
Architecture
MIPSBE
CPU core count
1
CPU nominal frequency
650 MHz
Dimensions
Wall case: 88 x 52 x 20 mm Ceiling case: ⌀88 mm x 20 mm
License level
4
Operating System
RouterOS
Size of RAM
64 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-40°C .. +70°C
Max Power consumption
4
PoE in
802.3af/at
PoE in input Voltage
10-60 V
Number of DC inputs
2 (PoE-IN, MicroUSB)
Wireless 2.4 GHz number of chains
2
Wireless 2.4 GHz standards
802.11b/g/n
Antenna gain dBi for 2.4 GHz
1.5
Wireless 2.4 GHz chip model
QCA9533
Max power consumption without attachments
4W
MicroUSB input Voltage
5-5 V