CRS212-1G-10S-1S+IN

CRS212-1G-10S-1S+IN

Smart Switch, 1x Gigabit LAN, 10x SFP cages, 1x SFP+ cage, LCD, 400MHz CPU, 64MB RAM, Metal desktop case, RouterOS L5

$219.00
Back-Order, Contact us for the ETA
 Product available for orders

Cloud Router Switch 212-1G-10S-1S+IN is new “small size low cost” member of our CRS series. It comes with one Gigabit Ethernet

RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel and serial port (RJ45). Product includes indoor desktop case and power supply. Special ears are provided for mounting the unit in rack.

Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.

Switching results

CRS212-1G-10S-1S+IN
ModeConfiguration64 byte512 byte1518 byte
kppsMbpskppsMbpskppsMbps
Switching Non blocking Layer 2 throughput 31,250.0 16,000.0 4,934.2 20,210.5 1,706.8 20,726.9
Switching Non blocking Layer 2 capacity 31,250.0 32,000.0 4,934.2 40,421.1 1,706.8 41,453.8
Switching Non blocking Layer 1 throughput 31,250.0 21,000.0 4,934.2 21,000.0 1,706.8 21,000.0
Switching Non blocking Layer 1 capacity 31,250.0 42,000.0 4,934.2 42,000.0 1,706.8 42,000.0

Ethernet test results

CRS212-1G-10S-1S+IN QCA8519 Max possible throughput test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 26.7 324.2 28.6 117.1 24.5 12.5
Bridging 25 bridge filter rules 21.4 259.9 22.4 91.8 22.2 11.4
Routing none (fast path) 23.0 279.3 23.5 96.3 24.5 12.5
Routing 25 simple queues 19.6 238.0 22.4 91.8 21.0 10.8
Routing 25 ip filter rules 7.9 95.9 10.4 42.6 10.8 5.5
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
CRS212-1G-10S-1S+IN
20 cm
14.40 cm
4.70 cm
Data sheet
Product code
CRS212-1G-10S-1S+IN
Architecture
MIPSBE
CPU
QCA8519
CPU core count
1
CPU nominal frequency
400 MHz
Dimensions
200x144x47mm
License level
5
Operating System
RouterOS
Size of RAM
64 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-20C to +55C tested
Max Power consumption
20
Number of DC inputs
1 (DC jack)
DC jack input Voltage
8-30 V
10/100/1000 Ethernet ports
1
SFP ports
10
SFP+ ports
1
Serial port
RJ45
Current Monitor
Yes
Voltage Monitor
Yes
PCB temperature monitor
Yes
Max power consumption without attachments
20W

You might also like