SXT 4G kit

SXT 4G kit

SXT 4G/LTE CPE, 10.5dBi 60 degree antenna, 2x Ethernet ports (one with PoE out), two SIM and LTE modem for bands 3, 7, 20, 31, 41n, 42 and 43

$139.00
Back-Order, Contact us for the ETA
 Product available for back-orders
  • Wireless Netware Technology as a MikroTik Value Added Master Distributor offers free hardware consulting to all of our valuable customers, finding the best hardware to fulfill all of the networking features at the highest performance, reasonable cost, and to guarantee the reliability. Wireless Netware Technology as a MikroTik Value Added Master Distributor offers free hardware consulting to all of our valuable customers, finding the best hardware to fulfill all of the networking features at the highest performance, reasonable cost, and to guarantee the reliability.

Description

The SXT 4G kit (product code RBSXTR&R11e-4G) is a device for remote locations that are within cellular network coverage. However, due to its professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t.

The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. The unit includes a 24 V power supply but can support the full range of 12-57 V and 18-57 V with PoE-Out and is 802.3af/at compliant.

The device has a built-in high-quality 4G/LTE Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink, as well as two Micro-SIM slots for backup link.

RBSXTR&R11e-4G includes LTE modem that supports LTE FDD bands 3 (1800MHz), 7 (2600MHz), 20 (800MHz) and 31 (450MHz), as well as LTE TDD bands 41n (2500MHz), 42 (3500MHz) and 43 (3700MHz).

Ethernet test results

RBSXTR&R11e-4Gr2 QCA9531 100M two-port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 16.3 197.9 47.0 192.5 297.6 152.4
Bridging 25 bridge filter rules 16.3 197.9 47.0 192.5 80.4 41.2
Routing none (fast path) 16.3 197.9 47.0 192.5 233.1 119.3
Routing 25 simple queues 16.3 197.9 47.0 192.5 131.4 67.3
Routing 25 ip filter rules 16.3 197.9 47.0 192.5 49.1 25.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Data sheet

MikroTik
RBSXTR&R11e-LTE-US
14 cm
14 cm
10.30 cm
1 kg
7540000001384
Data sheet
10/100 Ethernet ports
2
Product code
RBSXTR&R11e-LTE-US
Architecture
MIPSBE
CPU
QCA9531
CPU core count
1
CPU nominal frequency
650 MHz
Dimensions
140 x 140 x 103 mm
License level
3
Operating System
RouterOS
Size of RAM
64 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-40°C to 60°C
Max Power consumption
22 W
PoE in
802.3af/at
PoE out
Passive PoE up to 57V
PoE in input Voltage
12-57 V
Number of DC inputs
1 (PoE-IN)
Number of SIM slots
2 Modem (Mini SIM)
Max out per port output - input (less than 30 V)
600 mA
Max total out (A)
600 mA
Max power consumption without attachments
5 W
Max out per port output (input more than 30 V)
400 mA
MiniPCI-e slots
1
3G Category
R7 (21Mbps Downlinks, 5.76Mbps Uplink) / R8 (42.2Mbps Downlink, 5.76Mbps Uplink)
LTE Category
4 (150Mbps Downlink, 50Mbps Uplink)
LTE FDD bands
2 (1900MHz) / 4 (1700MHz) / 5 (850MHz) / 12 (700MHz)