LtAP mini LTE kit-US

LtAP mini LTE kit-US

Small weatherproof wireless access point with United States LTE modem, two SIM slots and GPS

$129.00
Available, Delivered in 1-2 business days
 In Stock

The LtAP mini LTE kit-US is a small waterproof wireless access point with a built in cellular modem that supports 3G and 4G (LTE) connectivity on United States LTE bands 2,4,5 and 12.

Connect to the LtAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging.

LtAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. External GPS antenna is available for ordering separately (not included, product code GPSANT).

The LTE card is connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your own external LTE antenna for better coverage. The unit has several powering options: 9-30 V PoE-in by Ethernet port, DC jack and microUSB.

Use the built in GPS module to track the location of your vehicle in real time, we have even provided a simple tracking application example in the RouterOS documentation, to help you start development of your platform.

Wireless specifications

2.4 GHzTransmit (dBm)Receive Sensitivity
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71


Ethernet test results

RB912R-2nD-LTm&R11e-LTE-US QCA9531 100M one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 173.6 88.9
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 70.9 36.3
Routing none (fast path) 8.1 98.4 23.5 96.3 160.8 82.3
Routing 25 simple queues 8.1 98.4 23.5 96.3 90.8 46.5
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
RB912R-2nD-LTm&R11e-LTE-US
23 cm
10 cm
5 cm
0.80 kg
25 Items
Data sheet
CPU
QCA9531
Product code
RB912R-2nD-LTm&R11e-LTE-US
Architecture
MIPSBE
CPU core count
1
CPU nominal frequency
650 MHz
Dimensions
139 x 77 x 28,5 mm
License level
4
Operating System
RouterOS
Size of RAM
64 MB
Storage size
16 MB
Storage type
FLASH
Tested ambient temperature
-40°C .. +70°C
Max Power consumption
9
PoE in
802.3af/at
PoE in input Voltage
12-57 V
Number of DC inputs
3 (DC jack, PoE-IN, MicroUSB)
DC jack input Voltage
8-30 V
10/100 Ethernet ports
1
Number of SIM slots
2 Modem (Mini SIM)
Serial port
RS232
Wireless 2.4 GHz number of chains
2
Wireless 2.4 GHz standards
802.11b/g/n
Antenna gain dBi for 2.4 GHz
1.5
Wireless 2.4 GHz chip model
QCA9531
Max power consumption without attachments
9W
MicroUSB input Voltage
5-5 V
MiniPCI-e slots
1
3G Category
R8 (42.2Mbps Downlink, 5.76Mbps Uplink) / R7 (21Mbps Downlinks, 5.76Mbps Uplink)
LTE Category
4 (150Mbps Downlink, 50Mbps Uplink)
LTE FDD bands
2 (1900MHz) / 4 (1700MHz) / 5 (850MHz) / 12 (700MHz)

You might also like